BWLHS - CADWELD STARTING MATERIAL
- MSDS: BWLHS
- Manufacturer: ERICO PRODUCTS INC
- Product Name: CADWELD STARTING MATERIAL
- National Stock Number: 3439-01-280-0494
Product Identification
Product ID:CADWELD STARTING MATERIAL
MSDS Date:05/24/1993
FSC:3439
NIIN:01-280-0494
MSDS Number: BWLHS
Responsible Party
CLEVELAND, OH 44139-2631
US
Emergency Phone: 216-248-0100
Info Phone: 216-248-0100 / FAX 216-248-0723
Preparer: DEAN MOORE
Cage: 14045
Contractor
Telephone: 216-248-0100
Cage: 14045
Ingredients
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: <45%
OSHA PEL 15 MG/M3 DUST
ACGIH TLV: 10 MG/M3 DUST; 9394
CUPROUS OXIDE
CAS: 1317-39-1
Fraction By Weight: <25%
CUPRIC OXIDE
CAS: 1317-38-0
RTECS: GL7900000
Fraction By Weight: <25%
OSHA PEL 1 MG CU/M3
ACGIH TLV: 1 MG CU/M3
IRON OXIDE
CAS: 1317-61-9
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
LD50 LC50 Mixture:ACGIH TLV FOR NUISSANCE DUST IS 10MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:RADIATION CAN CAUSE TEMPORARY
BLINDNESS.SKIN:MAY CAUSE IRRITATION.INHAL:DUST OR FUMES MAY CAUSE
REPIRATORY IRRITATION.INGEST:UNLIKELY ROUTE OF
EXPOSURE.CHRONIC:COPPER OXIDE DUST MAY CAUSE ULCERAT IONS IN THE
NASAL SEPTUM.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:SKIN:ALLERGIC DERMATITIS.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
RESPIRATORY AILMENTS MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:SKIN:TREAT FOR BURNS.EYES:FLUSH WITH WATER FOR 15
MINUTES.INHAL:REMOVE TO FRESH AIR.GIVE OXYGEN OR ARTIFICIAL
RESPIRATION IF NEEDED.INGEST:UNLIKELY TO BE NEEDED.
Fire Fighting
Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:850F
Lower Limits:40 MG/L
Extinguishing Media:LET FIRE EXTINGUISH ITSELF.DO NOT USE HALOGENATED
AGENTS OR WATER.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:THE FINELY DISPURSED DUST FROM THIS
PRODUCT IS A FIRE OR EXPLOSION HAZARD IN THE PRESENCE OF SOURCES OF
IGNITION.
Accidental Release
Spill Release Procedures:VENTILATE AREA.USE PROPER PROTECTIVE AND
RESPIRATORY EQUIPMENT.SCOOP UP OR VACUUM WITH
NON-SPARKING/NON-CONDUCTIVE EQUIPMENT;DO NOT CREATE DUST;PLACE IN A
DRY CONTAINER FOR DISPOSAL.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:STORE IN A COOL,DRY,WELL-VENTILATED
PLACE.KEEP CONTAINER CLOSED WHEN NOT IN USE.KEEP AWAY FROM
HEAT,SPARKS,FLAMES AND INCOMPATIBLE MATERIALS.
Other Precautions:AVOID MOISTURE.
Exposure Controls
Respiratory Protection:WHERE ENVIRONMENTAL CONTROLS ARE LACKING OR IN
ENCLOSED SPACES USE A NIOSH/MSHA APPROVED RESPIRATOR FOR
DUST/PARTICULATES.
Ventilation:USE CLASS II,GROUP E LOCAL EXHAUST.USE ONLY NON-SPARKING
EQUIPMENT.
Protective Gloves:WORK GLOVES
Eye Protection:SAFETY GLASSES WITH WELDER'S LENS
Other Protective Equipment:PROTECTIVE CLOTHING,AS NEEDED.PROVIDE A
LOCAL EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS.SEPERATE WORK CLOTHES FROM STREET
CLOTHES.LAUNDER WORK CLOTHES BEFORE REUSE.KEEP FOOD OUT OF THE WORK
AREA.
Supplemental Safety and Health
TO CHOOSE THE PROPER WELDING LENS,FIRST CHOOSE THE LENS WHICH BLOCKS
OUT THE RAYS;THEN USE THE NEXT LOWEST FILTER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1040F,560C
Spec Gravity:4.0
Solubility in Water:INSOLUBLE
Appearance and Odor:POWDER;GRAY;ODORLESS
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS,HALOGENATED COMPOUNDS,STRONG ALKALI.
Stability Condition to Avoid:DUSTY CONDITION WITH SOURCES OF
IGNITION.MOISTURE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.